|
Qt Premixed Floor Patch
Ready-to-use flooring patch for smoothing and repairing interior and exterior concrete, wood, and masonry. Fast drying premixed formula dries in only 2 to 3 hours. No primers or additives needed. Apply directly to clean, dry wood. Lightly dampen concrete and masonry using clean water and a stiff brush or sponge. Do not leave puddles or standing water. Open, stir if product separation has occurred, and apply product from feather edge to 1 In. maximum using a putty knife, broad knife, or trowel. If applying thicker than 1/4 In., apply in 1/4 In. layers and allow 2 to 3 hours drying between layers. Patch is dry when it cannot be indented with the tool handle. Thick applications, low temperatures, and high humidity require longer drying times. Clean up with warm water and a damp sponge before product hardens. Coverage: 4 to 5 Sq. Ft. per quart at 1/8 In. thickness.
View Details
|
263360 |
Qt Premixed Floor Patch |
2 |
13.99 |
/ EA |
12063 |
|
|
Henry Feather Finish Patch 7#
A Portland cement-based patch and skim coat that can be installed over almost any surface to provide a smooth and permanent finish prior to the installation of floor coverings or patching holes, gouges, cracks, and seams, in subfloors suchas concrete, brick, masonry, terrazzo and ceramic tile, wood, and metal, prior to the installation of any floor covering. Specially formulated with an ultra fast dry time. Dries in as little as 15 minutes. Can be installed from a feather edge to 5 In. depth. No primers or additives needed, just mix with water. Recommended mixing ratio is 2 parts powder to 1part water (by volume). For the entire bag, mix 1.75 quarts of water with the 7 Lb. bag. Coverage: Trowel with flat edge, 7 Lb. box covers approximately 198 Sq. Ft. at skim coat. Temperature should be above 65 deg. F. Remove dirt, wax, polish, paint, and other foreign material from floor prior to application. Mixing product with a 1/2 In. drill at a minimum650 RPM will produce a creamier and easier-to-apply mix. If the product begins to harden in the bucket use a drill to re-whip. Will not promote the growth of mold and/or mildew. 7 Lb. box.
View Details
|
274399 |
Henry Feather Finish Patch 7# |
3 |
21.49 |
/ EA |
12163 |
|
|
Pint Bonding Liquid
DAP /Bondex bonding liquid and floor leveler additive is a versatile product that can be used as a glue to bond new concrete to old and as an additive to increase adhesion and flexibility in plaster, mortar, concrete, floor leveler, stucco, and waterproof cement paint. For use indoors or outdoors. DAP Concrete Floor Leveler must be mixed with DAP Bonding Liquid & Floor Leveler Additive.
View Details
|
272092 |
Pint Bonding Liquid |
2 |
13.99 |
/ EA |
35082 |
|
|
Gal Levlquik Acrylic Pmr
LevelQuik Advanced Acrylic Primer/Sealer prepares surfaces for the application of LevelQuik or LevelLite Self-Leveling Underlayments. It seals porous and non-porous surfaces and improves the bond of underlayments. Suitable substrates include absorbent and non-absorbent concrete, lightweight concrete, cement terrazzo, exterior grade plywood, OSB, cutback adhesive residue, resilient flooring. Do not bond directly to hardwood, Luan plywood, particle board, parquet, cushion or sponge-back vinyl flooring, metal, fiberglass or plastic. Do not use as a wear surface.
View Details
|
267856 |
Gal Levlquik Acrylic Pmr |
6 |
46.99 |
/ GL |
CP1 |
|
|
50lb Bag Level-quik
A Portland cement based, pourable, self-leveling, underlayment which requires no latex additive, only water. No troweling necessary, LevelQuik flows and seeks its own level. Levels from featheredge up to 1-1/2 In. in 1 pour. Levels floors prior to installing ceramic tile, carpet, resilient flooring, wood flooring, etc. Apply over concrete, cement backer board, ceramic tile, brick, pavers, terrazo, marble, and plywood. Not recommended over hardwood or parquet floors. Recommended interior use and when ambient temperature is over 50 deg. F. Prime all surfaces with LevelQuick Concentrated Latex Primer Model No. CPQT before application. Cure time: 12 to 16 hours. Coverage: One 50 Lb. bag will cover approximately 40 Sq. Ft. at 1/8 In. thickness. Mix entire 50 Lb. bag of powder with 5.25-5.75 quarts (5-5.4 L) of clean, cool water. Solid Gray Powder. Clean with water before material dries - including equipment.
View Details
|
267864 |
50lb Bag Level-quik |
12 |
44.99 |
/ BG |
LQ50 |
|
